BR Series
Ergonomic, Intuitive Controls
Rubber Grips and Metal Support Plate
Two rubber grips allow for precise control, while a metal support plate designed to rest on the workpiece allows for strain-free use.
Easy On/Off Switch
The on/off switch is located on top of the primary handle, allowing for immediate control.
Adjustable Glue Pot Handle
The glue pot handle has two positions in case of workpiece interference.
Tape Insert Guide
A measured guide in increments of 1mm determines the width of the edgeband or edging tape and secures it in place for a regulated feeding.
Consistent Glue Application
A knob allows for on-the-fly regulation of glue amount for a mess-free, consistent result.
Edgebanding Made Simple
Straight-line and Contour Edgebanding
The BR300 Portable Edgebanders are perfect for all varieties and shapes of workpieces. For contoured or curved surfaces, the minimum inner radius is 25mm (1").
No Edgeband Iron or Hot Air Required
The glue is applied directly onto the edgeband or edging tape. Maintain steady pressure on the workpiece against the feeding roller to apply the edgeband or edging tape at desired temperature.
Glue-Free Edgebands
Save money on your edgebands. By not requiring edgebands or edging tape with pre-applied glue, our portable edgebanders help reduce your costs.
Material Compatibility
The tool works with PVC, melamine, laminate and wood edgebands and edge tape of 0.4mm - 3mm thickness and 10mm - 65mm width.
Angle Adjustment
Our portable edgebanders can operate on tilted surfaces of 75°- 90°, making beveled surfaces as simple as perpendicular ones.
Quick to Start
Co-Matic portable edgebanders need around 20 minutes to warm up from a cold start, and no warm-up time if the gluepot is refilled when at half capacity or more during operation.
Built to Last
Other portable edgebanders may require cool down times – not ours. Our machines are strenuously tested during QA.
Portable and Stationary Use
Designed for transportation and space-efficiency, our BR300 Portable Edgebander comes with a durable and lightweight case. For handheld operation, workpieces can be secured with VH03N Vacuum Clamp Set or VP03 Electric Clamping Kit. For stationary operation, they can also be secured to ST95 Stationary Worktable.
| Gross weight - Mobile Tote Case (Cruiser Case) |
11.6 kgs (17.5 kgs) |
|---|---|
| Net Weight |
8.7 kgs |
| Machine Size |
340 x 300 x 350 mm |
| Output Power with Motor |
855 W |
| Glue Pot Capacity |
400 ml |
| Warm-up Time | 4 mins (120°C / 250°F) |
| Working Temperature | 120°C - 200°C (250°F - 390°F) |
| Feeding Speed | 4.0 M/min. (13 Ft/min.) |
| Tape Thickness | 0.4 - 3 mm |
| Tape Width | 10 - 65 mm |
| Cordless banding | N/A |
| Temp. Control | YES |
| Digital Display & Control | N/A |
| Speed Control | N/A |
| Packing Size - Mobile Tote Case (Cruiser Case) |
350 x 300 x 380 mm / 576 units / 20' Container (460 x410 x 530 mm / 280 units / 20' Container) |
Specifications subject to change without notice.
The Integration of World Lightest, Most Compact, Highest Performance Portable Edgebander
- Custom alignment for use on straight or curved panels
- Suitable for portable or stationary application
- Special designed glue adjustment knob position to avoid interference during operation
- Temperature control / reheat quickly
- Amount of the glue applied could be easily adjusted
- Work for panel with beveled edges of 75 to 90 degrees
- Guiding plate width could be adjusted from scale of 10 - 65 mm
- Tape thickness could be adjusted from 0.4 - 3 mm
- Easy use by single operator
[Shipping Description]
Within two days after receipt of the order (excluding the holidays), the Commissioner will confirm the order with your Union or SMS.
This product is non-DIY goods, 4 floor below the floor fee, 5 floor above each additional 200 yuan, no recovery services.
Delivery area: Taiwan Island, the outer island does not receive a single. Due to special restrictions (mountain, township, town, village), the stairs are too small to move upstairs and other factors, leading to the delivery, the company has the right to ship.
large furniture distribution is not easy, delivery time to 7 to 14 working days, before delivery logistics company will confirm with you delivery time.
Hualien area (except Hualien City), Taitung area, Pingtung (except Pingtung City) and some remote areas (mountain) area, you need to receive additional freight, travel less delivery of about 10 to 20 Working days, remote areas determined by the logistics company. (You can order the order, follow up by the commissioner and your offer)
To protect the work of the logistics staff, the seller does not provide hanging service, if the crane or other hanging way lifting, the cost will be paid by the buyer.
because of the large furniture assembly, distribution problems, not the general arrival of goods quickly, can not specify a specific time delivery, the driver will be informed before the arrival of the day before you so that you do not have all day at home and other goods, so as not to waste you The precious time.
no recycling furniture service, for recycling furniture can contact the local cleaning team to recover, free shipping clearance line 0800-085-717
If you have any questions after receiving the goods, please contact us within 4 working days from the date of receipt of the goods and return it within seven days from the date of receipt of the goods in order to enjoy the After service.
If you do not return the status of this order, you purchase the goods invoice will receive the goods from seven to ten working days, please pay attention to the receipt box.
[post-purchase considerations]
The company is working from Monday to Friday 10: 00-18: 00, national holidays and other non-working hours to suspend online customer service, we still attach great importance to your valuable advice and any advice, we recommend that you can use the consultation form We will reply to you as soon as possible during working hours.
wake you, after each order is established, you can not manually change the details of the goods or merge orders, please be sure to confirm the order before the order details and order amount.
If you have any questions after receiving the goods, please contact us within 4 working days from the date of receipt of the goods and return it within seven days from the date of receipt of the goods in order to enjoy the After service.
If you do not return the status of this order, you purchase the goods invoice will receive the goods from seven to ten working days, please pay attention to the receipt box.
If you have any questions after receiving the goods, please contact us within 4 working days from the date of receipt of the goods and return it within seven days from the date of receipt of the goods in order to enjoy the After service.
If you do not return the status of this order, you purchase the goods invoice will receive the goods from seven to ten working days, please pay attention to the receipt box.